Motor under vatten
•
IP 68 certified air motors for use under water
DEPRAG air motors are used in almost every field of industry – even underwater. The ADVANCED LINE air motor series combines many advantages with their high quality stainless steel drives. Due to the robust design of the external parts in non-corrosive stainless steel and the sealing with two radial shaft sealing rings, these vane motors in the power range W to kW are predestined for use underwater.
Air motors in accordance with the IP 68 protection class
The IP (International Protection Class) indicates how well a device or del av helhet of verktyg is protected against external influences. Both protection against the penetration of utländsk bodies and protection against humidity are indicated bygd a combination of two digits after the designation “IP” (e.g. IP44). The first digit describes the degree of protection against foreign bodies and ranges from 0 to 6, where “6” stands for complete dust-tightness. The second digit indicates the protection against the ingress of moisture and ranges from 0 to 9, where “8” means that the device fryst vatten suitable for permanent underwater use.
In the case of IP 68, this means that the air motor is c
•
What are the requirements for an underwater motor?
As we step into the age of robotics and automation, we run into different challenges to overcome with special applications every day. One of those challenges has been developing a system equipped with components that can be submerged under water.
With a large amount of motors currently on the market, not many are capable of handling near-water or submerged-under-water situations. In this article, I will explain some of the key elements and requirements that are needed in order to use a motor around and under water. I will also discuss some other elements of using underwater materials such as cost differences and how the motor will perform.
Ingress Protection Ratings
Nowadays, there are already a plethora of other ways that motors can be made waterproof. We will look at a few igus solutions as well as some general requirements for the industry itself.
First, we must discuss the rating system of the capability of a motor with water resistance or dust/other debris. The IP Ratings, or Ingress Protection Ratings, provide these numbers in order to assess the overall protection against liquids and/or solids. In layman&
•
Inläggav Croaton »
(Här kommer då mitt första inlägg på detta forum!)
Som det är sagt redan tidigare så fungerar motorer bra i vatten. Nackdelen är att saltvatten (antagande) inte är det bästa för en motor vilket kommer att förkorta livet ganska regält på motorn.
Om motorn skall köras på ett grunt djup så fungerar det bra att kapsla in motorn i valfri kapsling och sedan köra med en vanlig axeltätning i gummi, eller enbart en o-ring (Du kan dock råka ut för mindre mängder vatten även i detta fall).
Den bästa och optimal lösningen är en inkapsling enligt ovan med en axeltätning, men man optimerar den genom att fylla motorrummet med någon ej ledande samt lättflyktig olja (transformatorolja?). Sedan ser man till att göra någon del av kapslingen flexibel.. genom att använda ett gummimembran. Sedan så ser man till att fylla så mycket olja att man får ett lätt övertryck i kapslingen och swoosh så har man en optimal undervattensmotor!
Blev en ganska konstig beskrivning, men det hela fungerar mycket bra och används ofta i djupgående ROVs. Gummimembranet finns för att tryckutjämna mellan vattnet och oljan i motorkapslingen, detta gör att motorkapslingen kommer att behå